Here you can set the Options for One-Touch GPS. One-Touch GPS is a possibility to measure a GPS position by just tapping one Hardware-Key:

• Using Use One-Touch GPS you can turn One-Touch GPS on and off.
• Using Measure after you can set, in Seconds, the time the Central Hardware Button must be kept pressed in order to initiate a measurement.
• Using Measure for you can set, in Seconds, the duration of a Measurement. Irregardless of this setting, a measurement is finished, as soon as the precision of the GPS Signal defined with Max Movement is reached.
• Using Max Movement you can set, in Yards or Meters, how precise you want the Measurements to be. As soon as the maximum Movement of the GPS Signal within the Measurement time is below the entered value, the Measurement is successful.
• Use Time Info Message to set the time within you must press the Hardware Button twice to be told for which Hole and Stroke the next measurement would be
• Using Learn Hardware Button you can learn the Hardware Button to be used for invoking One-Touch GPS Measurements. As Default, the central Hardware Button (usually in the middle of the Cross Cursor) is used.
• Using Use OTGPS Window you can show a button in the Playing Window to open a Window for using the One-Touch GPS Functionality without Hardware buttons, in case these cause problems on your specific Pocket PC.
• Using Show Window while measuring you can see a Window during the OTGPS Measurement informing about time and Quality of the GPS Signal
• Using Tell Distance to Green you can set that the remaining distance to the Green is told after each successful measurement.
• Using Tell present Hole and Shot you will be told, before each measurement, the Hole and Shot you are going to measure a GPS Position for.
• Use Button for Distance to Green to assign to a Hardware Button the function to tell you the distance from where you are to the Green. You will have to learn the Hardware Button to be used for this function. This Functionality is also integrated in the Yardage Book Screen.
• Use Ask for Shot Details after OTGPS to enter the Shot Details (Club, Result, Landing Zone) directly after recording a GPS Position in the OTGPS Window

As the One-Touch GPS consists of spoken feedback, please make sure that the speaker of your Pocket PC is turned on.

To select a different Setting, tap on the corresponding Tab on the Top of the Screen. To apply the GPS Settings, tap on Apply. To leave the Settings applying the new GPS Settings, tap on OK. To leave and Cancel the changes, tap on Cancel.